The EM78P163N is an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology. It has an on-chip 1Kx13-bit Electrical One Time Programmable Read Only Memory (OTP-ROM). It provides three protection bits to prevent intrusion of user's OTP memory code as well as from unwanted external accesses. Several code option bits are available to meet user's requirements.
With its enhanced OTP-ROM feature, the EM78P163N provides a convenient way of developing and verifying user's programs. Moreover, this OTP device offers the advantages of easy and effective program updates, using development and programming tools. User can avail of the ELAN Writer to easily program his development code.
0.00
0.00
The EM78P163N is an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology. It has an on-chip 1Kx13-bit Electrical One Time Programmable Read Only Memory (OTP-ROM). It provides three protection bits to prevent intrusion of user's OTP memory code as well as from unwanted external accesses. Several code option bits are available to meet user's requirements.
With its enhanced OTP-ROM feature, the EM78P163N provides a convenient way of developing and verifying user's programs. Moreover, this OTP device offers the advantages of easy and effective program updates, using development and programming tools. User can avail of the ELAN Writer to easily program his development code.
Features
CPU Configuration
1Kx13 bits on-chip ROM
48x8 bits on-chip registers (SRAM, general purpose)
5 level stacks for subroutine nesting?
Less than 1.5 Ma at 5V/IRC 4 MHz
Typically 15 Ua, at 3V/32kHz
Typically 1 Ua, during Sleep mode
3 programmable Level Voltage Reset (LVR):4.0V, 3.3V 2.4V
Power-on Reset (POR): 1.8V
I/O Port Configuration
2 bidirectional I/O ports : P5, P6
Wake-up port : P6
7 programmable pull-down I/O pins
7 programmable pull-high I/O pins?
7 programmable open-drain I/O pins
External interrupt : P60
Operating Voltage Range:
Operating voltage: 2.0V~5.5V at 0°C ~70°C (commercial)
Operating voltage: 2.2V~5.5V at -40°C ~85°C (industrial)
Operating Frequency range (base on 2 clocks):?
Crystal Mode:
DC~20MHz/2clks @ 5V
DC~8MHz/2clks @ 3V
DC~4MHz/2clks @ 2.1V
ERC Mode:
DC~16 MHz/2clks @ 4.5V
DC~12 MHz/2clks @ 4V
DC~4MHz/2clks @ 2.1V
Internal RC Drift Rate:?
(Ta=25°C, VDD=5V ± 5%, VSS=0V)
Internal RC Frequency
Drift Rate
Temperature (-40°C~85°C)
Voltage (2.0V~5.5V)
Process
Total
455kHz
± 5%
± 5%
± 3%
± 13%
4 MHz
± 5%
± 5%
± 3%
± 13%
8 MHz
± 5%
± 5%
± 3%
± 13%
16 MHz
± 6%
± 5%
± 3%
± 14%
Peripheral Configuration
8-bit real time clock/counter (TCC) with selective signal sources, trigger edges, and overflow interrupt
One comparator (typical offset voltage 10mV when input voltage range 0.5V~4.5V) with Cin+/internal Vref level select and Cin- 4 channel switch.
One Pulse Width Modulation (PWM ) with 10-bit resolution· High EFT immunity
Power down mode (Sleep mode)
Five available Interrupts:
TCC overflow interrupt
Input-port status changed interrupt (wake-up from sleep mode)
External interrupt?
PWM period match completion
Comparator output change interrupt
Other Features
Programmable prescaler of oscillator set-up time
One security register to prevent intrusion of user's OTP memory code
One configuration register to match user's requirements
Two clocks per instruction cycle
TBRD instruction
Package Type:
14-pin DIP 300mil : EM78P163ND14J
14-pin SOP 150mil : EM78P163NSO14J
16-pin DIP 300mil : EM78P163ND16J
16-pin SOP 150mil : EM78P163NSO16J
Note: Green products do not contain hazardous substances.