The EM78P156K is an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology. The device has an on-chip 1024 x 13-bit Electrical One Time Programmable Read Only Memory (OTP-ROM). It provides a protection bit to prevent intrusion of user's OTP memory code. Three Code option words are also available to meet user's requirements.
With enhanced OTP-ROM features, the EM78P156K provides a convenient way of developing and verifying user's programs. Moreover, this OTP device offers the advantages of easy and effective program updates, using development and programming tools. User can avail of the ELAN Writer to easily program your development code.
0.00
0.00
The EM78P156K is an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology. The device has an on-chip 1024 x 13-bit Electrical One Time Programmable Read Only Memory (OTP-ROM). It provides a protection bit to prevent intrusion of user's OTP memory code. Three Code option words are also available to meet user's requirements.
With enhanced OTP-ROM features, the EM78P156K provides a convenient way of developing and verifying user's programs. Moreover, this OTP device offers the advantages of easy and effective program updates, using development and programming tools. User can avail of the ELAN Writer to easily program your development code.
Features
CPU configuration
1k * 13 bits on-chip ROM
48 * 8 bits on-chip registers (SRAM, general purpose)
5 level stacks for subroutine nesting
3 programmable level voltage reset?
LVR : 4.0, 3.5, 2.7V
Less than 1.5 mA at 5V / 4MHz
Typically 15 μA at 3V / 32kHz
Typically 1 μA during Sleep mode
I/O port configuration
2 bidirectional I/O ports : P5, P6
12 I/O pins
Wake-up port : P6
7 Programmable pull-down I/O pins
8 programmable pull-high I/O pins
8 programmable open-drain I/O pins
2 programmable R-option pins
External interrupt : P60
Operating voltage range:
2.1V ~ 5.5V at 0 ~ 70(C (Commercial)
2.3V ~ 5.5V at -40 ~ 85(C (Industrial)
Operating frequency range(base on 2 clocks)
Crystal mode:??
DC ~ 20MHz / 2clks @ 5V
DC ~ 8MHz / 2clks @ 3V
DC ~ 4MHz / 2clks @ 2.1V
IRC mode:?
Internal RC Frequency
Drift Rate
Temperature
(-40°C~85°C)
Voltage
Process
Total
4MHz
±1%
±3% @ 2.1~5.5V
±2%
±6%
16MHz
±1%
±1% @ 4.0~5.5V
±2%
±4%
8MHz
±1%
±2% @ 3.0~5.5V
±2%
±5%
1MHz
±1%
±3% @ 2.1~5.5V
±2%
±6%
ERC mode: DC ~ 2MHz / 2clks @ 2.1V
Peripheral configuration
8-bit real time clock / counter (TCC) with selective signal sources, trigger edges, and overflow interrupt
2 / 4 clocks per instruction cycle selected by code option
High EFT immunity
Three available interrupts
TCC overflow interrupt
Input-port status changed interrupt (wake-up from sleep mode)
External interrupt
Special Features
Programmable free running watchdog timer
Power saving sleep mode
Selectable oscillation mode
Package Type:??
18-pin DIP 300mil : EM78P156KD18J
18-pin SOP 300mil : EM78P156KSO18J
20-pin SSOP 209mil : EM78P156KJSS20J
Note: These are all Green products which do not contain hazardous substances.