-
8K x 13 bits on-chip ROM
-
272x8 bits on-chip registers (SRAM)
-
8-level stacks for subroutine nesting
-
Dual clock operation or PLL operation mode
-
Four operation mode: Normal, Green, Idle, Sleep
-
Four programmable Level Voltage Detector (LVD) : 3.9V, 3.3V, 2.7V, 2.4V
-
Four programmable Level Voltage Reset (LVR) : 3.9V, 3.3V, 2.6V, 2.1V(POR)
-
Less than 2.1 mA at 5V/4MHz
-
Typically 22 uA, at 3V/32kHz
-
Typically 8 uA, during sleep mode
-
Single Instruction Cycle Commands
-
6 bi-directional I/O ports : P7, P8, P9, PA, PB, PC
-
43 I/O pins
-
8-pin Direct Drive LED
-
39 Programmable open-drain I/O pins
-
43 programmable pull-high I/O pins
-
External interrupt : P74~P77, PB0~PB3, P82~P83
-
Operating voltage range:?
OTP version:
-
Operating voltage range : 2.3V~5.5V
-
Operating temperature range : -40~85°C
-
Operating frequency range:
-
Crystal/RC oscillation circuit selected by code option for system clock
-
32.768kHz crystal/RC oscillation circuit selected by code option for sub-oscillatio
Main Clock
DC~20MHz/2 clks @ 5V; DC~100ns inst. Cycle @ 5V
DC~8MHz/2 clks @ 3V; DC~250ns inst. Cycle @ 3V
DC~4MHz/2 clks @ 2.3V; DC~500ns inst. Cycle @ 2.3V
DC~2.2MHz/2 clks @ 2.3V; DC~909ns inst. Cycle @ 2.3V
DC~16MHz/2 clks @ 5V; DC~125ns inst Cycle @ 5V
Sub Clock
-
Crystal mode: 32.768kHz
-
ERIC mode: 33kHz (2.2MW)
-
Serial peripheral interface (SPI) available
-
8-bit real time clock/counter (TCC)
-
12-channels Analog-to-Digital Converter with 12-bit resolution in Vref mode
-
LCD: 8x23 dots, bias (1/2, 1/3, 1/4), duty (static, 1/3, 1/4, 1/8)
-
Two 8-bit timers
-
8-bit Timer 1, auto reload counter/timer which can be an interrupt source. Function mode; Timer, Toggle output, UART baud rate generator, Capture, PWM
-
8-bit Timer 2, auto reload timer which can be aninterrupt source. Function mode; Timer, SPI baud rate generator, PWM
-
Two sets of 8 bits auto reload counter/timer which can be cascaded to one 16-bit counter/timer
-
Universal asynchronous receiver / transmitter (UART) available
-
Four programmable watch timer: 1.0 sec, 0.5 sec, 0.25sec, 3.91ms
-
Four programmable buzzer output: 0.5kHz, 1kHz, 2kHz, 4kHzn?
-
Eighteen available interrupts:
-
TCC overflow interrupt
-
Ten External interrupts?
(wake-up from sleep mode)
-
ADC completion interrupt
-
Two timer interrupt
-
Watch timer interrupt
-
Two serial I/O interrupt
-
Low voltage detect (LVD)
-
Programmable free running watchdog timer
-
High ESD immunity
-
High EFT immunity
-
Power saving Sleep mode
-
Selectable Oscillation mode
-
32 pin SDIP 400mil : EM78P520NK32A
-
32 pin SOP 450mil : EM78P520NSO32
-
44 pin QFP 10x10mm : EM78P520NQ44
-
44 pin LQFP 10x10mm : EM78P520NL44
-
48 pin LQFP 7x7mm : EM78P520NL48
Note: Green product do not contain hazardous substances
|